Have you ever wondered why, during hard cornering, your car handles differently? Well, racers have discovered that this is due to the shock towers spreading apart. When this occurs, positive camber is induced into your suspension causing the car to handle poorly. To reduce this positive camber, racers have put a strut brace between the shock towers to maintain the proper camber.

At KLA Industries LLC. we have been working to develop a strut brace that not only eliminated this problem but also found a balance between weight, durability, strength and cost. We have finally reached the perfect balance of each.  Mounting brackets are 7 gauge steel, laser cut, zinc electroplate for corrosion resistance.   Bar is 6061-T6 aluminum for weight savings.  Ends are zinc plated, chromate treated C1045 steel.  Ball is 52100 bearing steel, heat treated, hard chrome plated.  Bar and ends are left/right threaded so bar may be pre-loaded.  We utilize no slots for bolts to slide.  All adjustments are via the threaded ends.  All hardware is grade 8 and is included.

Fits all 16V cars, 944S, 944S2, 968.

If you are ordering from outside the USA, please click the button below for additional international shipping. Please check our Dealers page to see if we have a dealer near you.*

 Please email me with any questions or to discuss ordering.


Installation Instructions



 *Clicking the "international shipping" button will add $34.95 to your cart.    If you are an international customer and do not click the international shipping button, I will contact you before accepting payment to add the additional shipping.